About the shields
The full-size shields are constructed by hand, using (2x)plywood with
a fabric covering painted over with multilayered white, and also
feature leather arm padding and adjustable strapping.
The leather is attached using copper riveting. I do not bind or edge
my shields currently, though I’m considering options. As far as SCA
rules about an edging, there are some region Arms Marshalls are fine
with a fabric covered, treated edge: others require an edging such as
rawhide, leather etc
The wee shields are similar in most respects, except a single
straight sheet of thicker plywood base is typically used, and leather
strapping is of a simpler, non-adjustable design. From time to time, I
might have a curved version available. Due to the nature of lively and
rambunctious little ones, your mileage may vary, as regards the
longevity of the wee shield.
=======================
My shields are not mass produced, and therefore will likely not be
free from some imperfections, e.g. they might not be accurate to CNC
specs.
I believe this lends itself to the shield possessing a somewhat personal, down to earth quality.
I believe this lends itself to the shield possessing a somewhat personal, down to earth quality.
I strive to craft these shields to be pleasing to the eye, and able
to be utilized as weapons of (simulated)war, though they are not made of
metal, and as such, the amount of ‘wear and tear’ your shield will
endure, will certainly vary from person to person, and use to use.
Also, I occasionally am asked if left-handed shields are possible, and the short answer to that is, ‘absolutely!’